12v RFID UNIT

12v RFID UNIT

Regular price
$14.99
Sale price
$14.99
Regular price
Sold out
Unit price
per 

RFID receiver unit with two pre-programmed key fobs & one master key. When fob is brought within 3 inches of the sensor the unit outputs 12v+. 

  • One RFID receiver unit
  • Two Key Fobs housed in robust plastic housing
  • One master key to program additional keys
  • Requires 12VDC to run -- not included. 

Compatible with Whisper RFID Relay (servo cable not included)

 Maximize RFID range with our mounting brackets found here.

 

FAQ

Does this work with RFID Cards?
Yes, purchase them directly from us Here

To Add New Keys:

1. Make sure the RFID unit is powered on.
2. Make sure the new keys you are using are 125kHZ.
3. Remove the master key from the metal tin.
4. Hold the master key next to the antenna for a few seconds (the antenna is the domed black plastic piece. The top of the dome is where it has the best sensing capabilities).
5. Remove the master key and place your new key near the antenna. Leave it there for 5 seconds.
6. Pull the key away and then bring it back in range of the antenna. The light should now light up

 

To Remove Keys:
The only way to remove a key is to clear all keys from the entire device

1. Make sure the RFID unit is powered on.
2. Remove the master key from the metal tin.
3. Hold the master key next to the antenna for a 15 seconds (the antenna is the domed black plastic piece. The top of the dome is where it has the best sensing capabilities).
5. Remove the master key
6. Wait 5 seconds

System is now wiped